KosmOS firmware history

Fixes that can change your sound.

• Fixes an input-level regression on NAM A2 captures.
• Fixes colouration and phase in the FX Loop and Return Blend controls.

Sound change. FX Loop and Return now blend differently, so presets using those blocks may sound different.

Release notes for 1.19.1

A guitar amp, a phaser and a cab.

• Adds Hi-Five 103, Pheral 91 Phaser and the SWE Nordline 4x10 cab.
• MIDI scene-change setting: change bank and scene, or scene only.
• NAM A2 optimisation.
• Templates for Marketplace blocks.

Release notes for 1.19.0

Tone3000 controls and no loader cap.

• Blend and EQ position added to the Tone3000 block.
• The limit of three neural loader blocks per preset is gone.

Release notes for 1.18.1

Axioma synth and more preset space.

• Adds Axioma, Darkglass's monophonic bass synth with 12 templates.
• Up to 127 User Preset Areas.

Release notes for 1.18.0

Fixes.

• Fixes to the Tone3000 block and Mixer linking.
• Fixes a freeze after browsing large NAM or IR collections.

Release notes for 1.17.1–1.17.3

The Tone3000 block and MIDI out.

• Adds the Tone3000 block for TONE3000 tone packs synced through Darkglass Suite.
• MIDI out per preset and scene, looper control over MIDI, USB MIDI and MIDI thru settings.
• Device backup through Darkglass Suite.
• Loaders and utilities share the new Loaders & Utilities category.
• Manual updated to v1.17; the previous firmware is published for roll-back from here on.

Release notes for 1.17.0

Fixes.

• Fixes a Bluetooth and USB regression, expression endpoints and expression bindings on Marketplace blocks.

Release notes for 1.16.1–1.16.3

NAM A2, 126 scenes and new Peggy blocks.

• Full support for NAM A2 captures, in partnership with TONE3000.
• Adds Peggy Classic, Peggy Fliptop, the Peggy Fliptop 1x15 cab and Hi-Pass + Lo-Pass Filter.
• Up to 126 scenes per preset, with the Scene Manager.
• DSP load meters and numpad value entry.
• Behavior settings for mode cycling and up/down footswitch actions.

Release notes for 1.16.0

Stereo fixes.

• Fixes stereo handling in Entropia and Ignissor.

Release notes for 1.15.1

Spring reverb, a third-party gate and a new looper.

• Adds Spring Reverb and the Nembrini Audio Noise Gate.
• On-screen overlays and pop-ups for blocks in trial mode.
• Blocks can be hidden or marked as favourites.
• Gentle preamp engine reworked.
• Looper rebuilt with slots and up to 126 stored loops.

Release notes for 1.15.0

Fixes.

• Bug fixes after the Marketplace launch.

Release notes for 1.14.1

The Marketplace opens.

• Support for third-party blocks from the Anagram Marketplace.
• Toggle switches on the touchscreen.

Release notes for 1.14.0

Ignissor and Input Gain.

• Adds Ignissor, Darkglass's multiband compressor plugin.
• Input Gain with six named instrument slots.
• Manual updated to v1.13.

Release notes for 1.13.0

Expression blocks and the Anagram Press.

• Adds Volume Pedal, the Wauwa wah and Pitch Bender.
• Expression bindings reworked and made global.
• Anagram Press expression pedal announced.

Release notes for 1.12.0

Freeze and crash fixes.

• Fixes several freezes and crashes.

Release notes for 1.11.1

An amp, a fuzz and boot progress.

• Adds the Fruity HB 500 amp and the Mood Fuzz.
• Boot progress shown on the LEDs.

Release notes for 1.11.0

Update fix.

• Fixes manual updating over USB mass storage.

Release notes for 1.10.1

Three more amps.

• Adds SWE TC650, Modern ISOBRICK 750 and Modern ISOBRICK 750 OD.

Release notes for 1.10.0

Two new bass amps.

• Adds the SWIRL-900 and Tiny Lark III amps.
• USB compatibility with iPad.

Release notes for 1.9.0

Compressor metering, with a sound change.

• Gain-reduction meters on the compressors.
• Compressor threshold ranges lowered, so existing presets can sound different.
• Input and output meters on blocks, and a zoomed-out chain view.

Sound change. Compressor thresholds changed: check presets that use compressors after updating.

Release notes for 1.8.0

Modulation and a parametric EQ.

• Adds Tremora Tremolo, Pharos Phaser, Vibralis Vibrato and Parametric EQ.
• Options to reset blocks to their defaults.
• The tuner can be opened from inside block settings.

Release notes for 1.7.0

Stability fixes.

• Fixes for Bluetooth and for crashes in the looper and tuner.

Release notes for 1.6.1

Entropia multiband distortion.

• Adds Entropia, Darkglass's three-band distortion plugin.
• Warns when the chain overloads the DSP.

Release notes for 1.6.0

Four new drive blocks.

• Adds Atomic Sans, Green PiRate Fuzz, Bee Kolme OD and Arc Dreamer.

Release notes for 1.5.0

The first MIDI implementation.

• Program Change selects presets and banks.
• Control Change for scenes, bindings, mode select and the tuner.
• Support for Darkglass's MIDI footswitch.

Release notes for 1.4.0

Bluetooth audio for playing along.

• Bluetooth audio streaming in (beta), for play-along.
• USB audio leaves beta.
• Device Settings regrouped into categories.

Release notes for 1.3.0

USB audio arrives as a beta.

• USB audio interface mode (beta).
• Fixes to macro bindings.
• Factory presets are now locked against overwriting.

Release notes for 1.2.0

NAM engine tuning and more flexible bindings.

• Neural Amp Modeler engine tuned.
• Block bypass can now be assigned in bindings.
• The Gain block can turn all the way down to mute.
• Microtubes B3K and Vintage Microtubes behave better inside split chains.

Release notes for 1.1.0

The version the Anagram shipped with.

• Launch firmware: block-based chain with built-in amps, cabs, drives, effects and the three Neural loaders for NAM and AIDA-X files.

Release notes for 1.0.0